Skip to main content

Engineering notes

Notes from the applications desk

Sizing calculations, DFM reviews, how to audit a supplier certificate, freight economics — written by the engineers who do the work. No thought-leadership filler.

All topicsdfm2oem1hydraulic-press1metal-forming1tonnage-selection1cnc-machining15-axis1metal-fabrication1veneer-dryer1woodworking1

6 articles

Jonas Müller, Application Engineering

Hydraulic Press Tonnage Selection: A Practical Guide

Selecting the right tonnage for a hydraulic press is the most common engineering question we get from metal-formers. Too little tonnage causes defects; too much wastes capital and energy. Here's the practical calculation we use with our customers.

hydraulic-pressmetal-formingtonnage-selectiondfm
Dr. Wei Zhang, Manufacturing Engineering Lead

5-Axis vs 3-Axis CNC Machining: When the Upgrade Pays Off

Most parts don't need 5-axis machining. But when they do, the cycle-time savings and quality gains are dramatic. Here's our framework for deciding when to recommend a 5-axis setup for a customer project.

cnc-machining5-axisdfmmetal-fabrication
Dr. Wei Zhang, Process Engineering Lead

Choosing the Right Veneer Dryer for Your Mill Capacity

How to size a roller veneer dryer for a plywood, LVL or decorative-veneer mill. Capacity formulas, heating-media trade-offs, and a decision framework based on your annual throughput target.

veneer-dryerwoodworkingcapacity-planningplywood
Ming Li, Quality Director

ISO 9001:2015 — Real Quality System vs Paper Certificate

About 1 million companies worldwide are ISO 9001 certified. The honest truth: many of those certificates are not worth much. Here's how to tell whether an industrial-machinery supplier runs a real QMS or just has paper on the wall.

iso-9001quality-managementsupplier-audit
Chat on WhatsApp